Joist bridging
The term 'bridging' refers to a brace, or an arrangement of braces, that is fixed between floor or roof joists to keep them in place, prevent joist rotation, and distributing loads over more than one joist. Other, similar terms include 'nogging' and 'dwang'.
Bridging can help strengthen a floor and stop it from bouncing when occupants walk across it. By bridging, each joist shares load with the one/s next to it, which can help reduce deflection by as much as half.
There are a number of different bridging techniques that can be used. Solid bridging involves joist-depth timber being installed perpendicular to and between the joists. Cross-bridging involves an ‘X’ being formed between joists by pairs by braces (also known as herringbone struts).
If a floor has bridging running down the centre already, it can be stiffened further by adding additional rows on either side. The bridging that is already in place should be fastened tightly using additional nails or screws. A good rule-of-thumb is that the span of the joists should be measured and then divided by three, with rows of bridging then placed at both of the one-third points.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Licensing construction; looking back to look forward
Voluntary to required contractors (licensing) schemes.
A contractor discusses the Building Safety Act
A brief to the point look at changes that have occurred.
CIOB Construction Manager of the Year award
Shortlist set to go head-to-head for prestigious industry title.
How orchards can influence planning and development.
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.